Toyota 2011 Highlander User Manual Page 558

  • Download
  • Add to my manuals
  • Print
  • Page
    / 615
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 557
556
6-1. Specifications
Lubrication system (2.7 L 4-cylinder [1AR-FE] engine)
Engine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use
Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy
the following grade and viscosity.
Oil grade: ILSAC multigrade engine oil
Recommended viscosity: SAE 5W-20 or 0W-20
SAE 5W-20 or 0W-20 engine oil
may be used. However, SAE
0W-20 is the best choice for
good fuel economy and good
starting in cold weather.
The 0W portion of the oil viscosity rating indicates the characteristic of the
oil which allows cold startability. Oils with a lower value before the W allow
for easier starting of the engine in cold weather.
The 20 in 0W-20 indicates the oil viscosity when the oil is at its operating
temperature. An oil with a higher viscosity may be better suited if the vehi-
cle is operated at high speeds, or under extreme load conditions.
Oil capacity
(Drain and refill
reference)
Without filter
With filter
4.2 qt. (4.0 L, 3.5 Imp. qt.)
4.6 qt. (4.4 L, 3.9 Imp. qt.)
Outside temperature
Page view 557
1 2 ... 553 554 555 556 557 558 559 560 561 562 563 ... 614 615

Comments to this Manuals

No comments