Toyota 2010 Sienna User Manual Page 517

  • Download
  • Add to my manuals
  • Print
  • Page
    / 613
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 516
494
4-3. Do-it-yourself maintenance
CAUTION
Replacing light bulbs
Turn off the headlights. Do not attempt to replace the bulb immediately
after turning off the headlights.
The bulbs become very hot and may cause burns.
Do not touch the glass portion of the light bulb with bare hands. Hold the
bulb by the plastic or metal portion.
If the bulb is scratched or dropped it may blow out or crack.
Fully install light bulbs and any parts used to secure them. Failing to do so
may result in heat damage, fire, or water entering the headlight unit. This
may damage the headlights or cause condensation to build up on the lens.
Do not attempt to take apart or repair the low beam headlight bulbs, con-
nectors, power supply circuits, or related components.
Doing so could result in electric shock and serious injury or death.
Discharge headlights
Contact your Toyota dealer before replacing discharge headlights (includ-
ing light bulbs).
Do not touch the high-intensity discharge headlight’s high voltage socket
when the headlights are turned on.
An extremely high voltage of 20000 V will be discharged and could result
in serious injury or death by electric shock.
To prevent damage or fire
Make sure bulbs are fully seated and locked.
NOTICE
When installing the back door trim
To prevent damage, be careful not to pinch any of the wire harnesses or
connectors with the back door trim.
Page view 516
1 2 ... 512 513 514 515 516 517 518 519 520 521 522 ... 612 613

Comments to this Manuals

No comments