Toyota Super Jeans 15PE Instruction Manual download pdf (Page 26)

Changing the needle

Correct needle selection

If a faulty needle is used, not only could it impair the sewing performance, but it could

also damage the needle plate or hook, or break the needle.



Good needle

Incorrect stitching or thread breaking, try replacing the *

needle.

Screw driver for

the needle plate

Needle clamp

screw

Face the at surface of the

needle to the rear and insert until

it makes contact with the pin.

Firmly tighten the needle clamp

screw with the screw driver for

the needle plate.

Flat surface

Turn the handwheel towards yourself to

raise the point of the needle higher than the

needle plate.

Hold the needle in one hand, loosen the

needle clamp screw with the screw driver for

the needle plate, and remove the needle.

Note:

Do not remove the needle clamp screw.

Loosen the needle clamp screw to remove

the needle.

Faulty needle

The entire needle is

bent

The point of the needle

is crushed / worn away

The point of the needle

is bent

Caution

Before changing the needle, use the main power switch to turn off the

sewing machine.

Not doing so could cause an injury.

Broken needles are dangerous. Be sure to dispose of them in a safe

place away from children.

Not doing so could cause an injury.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Comments to this Manuals

No comments

Toyota Super Jeans 15PE Instruction Manual Page 26

Comments to this Manuals

Related products and manuals for Sewing machines Toyota Super Jeans 15PE