Toyota 2010 Sienna User Manual Page 554

  • Download
  • Add to my manuals
  • Print
  • Page
    / 613
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 553
532
5-2. Steps to take in an emergency
If the battery is discharged
The following procedures may be used to start the engine if the vehi-
cle's battery is discharged.
You can call your Toyota dealer or qualified repair shop.
If you have a set of jumper (or booster) cables and a second vehi-
cle with a 12-volt battery, you can jump start your Toyota following
the steps below.
Connecting the jumper cables
Positive (+) battery terminal on your vehicle
Positive (+) battery terminal on the second vehicle
Negative (-) battery terminal on the second vehicle
Connect the jumper cable to ground on your vehicle as shown in
the illustration.
Start the engine of the second vehicle. Increase the engine
speed slightly and maintain at that level for approximately 5
minutes to recharge the battery of your vehicle.
Maintain the engine speed of the second vehicle and turn
the engine switch to the “ON” position, then start the vehi-
cle's engine.
STEP
1
STEP
2
STEP
3
Page view 553
1 2 ... 549 550 551 552 553 554 555 556 557 558 559 ... 612 613

Comments to this Manuals

No comments