Toyota ECO15A Instruction Manual download pdf (Page 23)

• Changing the needle

Caution

Remove the power plug from the outlet when changing

the needle.

Not doing so could cause an injury.

Broken needles are dangerous. Be sure to dispose of

them in a safe place away from children.

Not doing so could cause an injury.

Turn the handwheel towards yourself

to raise the end of the needle higher

than the needle plate.

Hold the needle in one hand, loosen

the needle clamp screw with the screw

driver for the needle plate, and remove

the needle.

Note: Do not remove the needle

clamp screw. Loosen the

needle clamp screw to

remove the needle.

Correct needle selection

Good needle

Faulty needle

The entire needle is bent

The point of the needle

is crushed / worn away

The point of the needle

is bent

If a faulty needle is used, not only could it impair the sewing

performance, but it could also damage the needle plate or

hook, or break the needle.

∗

Incorrect stitching or thread breaking, try replacing the

needle.

Screw driver for the needle plate

Needle clamp

screw

Face the ﬂ at surface of the needle

to the rear and insert until it makes

contact with the pin.

Firmly tighten the needle clamp

screw with the screw driver for the

needle plate.

Flat surface

Sewing preparations

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Comments to this Manuals

No comments

Toyota ECO15A Instruction Manual Page 23

Comments to this Manuals

Related products and manuals for Sewing machines Toyota ECO15A