Toyota ECO15A Instruction Manual download pdf (Page 40)

40

3

Attaching the Bobbin Case

1

Install the bobbin case from the front.

The red mark a on the bobbin case

should be in the position, as shown in the

diagram.

2

Align the red mark a and b, and attach

the needle plate with the projection c

on the bobbin case positioned as shown

in the diagram.

Make sure that bobbin case moves

slightly from side to side as indicated

by the arrow.

4

Tighten needle plate clamp screws.

Turn the handwheel and see if hook

moves smoothly.

When the bobbin case is attached

incorrectly, the handwheel is heavy and

does not turn smoothly.

At that time remove the needle plate and

the bobbin case, attach them again.

Attach the needle and presser foot.

Make sure that the needle goes into

the hole of needle plate correctly while

turning the handwheel towards yourself.

c

b

a

b

a

Needle plate

a

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments