Toyota ECO15A Instruction Manual Page 39

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 38
39
2
Feed dog and hook maintenance
If the sewing machine makes a loud noise or rotates slowly, or there could be thread
waste or dust in the hook or feed dog. Perform maintenance on the hook and the feed
dog.
Do not use detergent,
bleach, benzine, or
thinner chemical cloths.
Doing so could cause
discoloration or cracking.
When cleaning the
hook, disconnect
the power plug.
Not doing so could
cause an injury.
Attention
Cleaning the feed dog and hook
1
Remove presser foot and needle.
Loosen screws of needle plate with
screw driver for the needle plate and
take off needle plate.
Lift bobbin case in the direction of the
arrow and remove it.
3
Brush off lint and dust on feed dog and
hook, then clean it with a soft cloth.
A vacuum cleaner wand or hose may be
used to remove lint from this area.
Presser foot
Bobbin case
Caution
Feed dog
Hook
Maintenance
Page view 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 47 48

Comments to this Manuals

No comments