Toyota ECO15A Instruction Manual Page 43

  • Download
  • Add to my manuals
  • Print
  • Page
    / 48
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 42
43
If the above treatments do not solve the problem, contact the service center as
described in your warranty.
When calling for service, please note the MODEL and SERIES that are inscribed on the
back of your sewing machine.
SP10 SERIES / SERIE
SP10 SERIES / SERIE
max 15W
max 15W
Total 85W
Total 85W
MODEL / MODELE
MODEL / MODELE
220-240V
220-240V
50Hz
50Hz
Manufacturer/ : ZHEJIANG AISIN ELITE
Fabricant MACHINERY & ELECTRIC
CO., LTD.P.R.C.
Importer/ : EUROPE S. A.
Importateur
MADE IN P. R. C. / FABRIQUE A P.R.C.
Designed and engineered by
Designed and engineered by
AISIN SEIKI JAPAN
AISIN SEIKI JAPAN
Trouble Cause Countermeasure Page
Missed
stitches
The needle is incorrectly
installed
Install the needle correctly
21
The needle is bent Use a straight needle
21
The needle and thread are not
appropriate for the fabric
Sew with a needle and thread
appropriate to the fabric
22
The upper thread is not
correctly thread
Thread the upper thread correctly
15
The fabric
wrinkles /
puckers
The tension of the upper
thread is too tight
Adjust the thread tension
28
The upper and lower thread
are not correctly thread
Thread the upper and lower thread
again
14, 15
The needle is too thick for the
cloth
Use a needle appropriate to the
fabric
22
The needle is burred Use a good needle
21
Too much
lower thread
showing on
right side of
the fabric
The lower thread is incorrectly
threaded
Thread the lower thread again
14
The tension of the upper
thread is too tight
Adjust the thread tension
28
The bobbin is not correctly
inserted in the bobbin case
Insert the bobbin in the bobbin
case correctly
14
Too much
upper thread
showing on
wrong side of
the fabric
The upper thread is not
correctly threaded
Thread the upper thread correctly
15
The tension of the upper
thread is too loose
Adjust the thread tension
28
The upper thread is not
correctly threaded (not
threaded through the thread
guide)
Thread the upper thread correctly
15
Page view 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments